How to use a ride-on floor scrubber

1. Untie the power cord and check whether there is any damage or leakage. If it is intact, you can install the needle seat, floor cleaning pad or floor brush in the counterclockwise direction at the bottom of the machine. When washing smooth floors, you should install the needle seat to press the cleaning pad; when washing rough floors, you should install the brush. Adjust the handle to an angle that is convenient for you to operate.

2. After checking and confirming that the switch is in the off state, plug in the power and use it.

3. Put the power cord on the back, hold the handle with both hands, and then turn on the switch. At this time, the brush plate or needle plate is level with the ground. Grasp the joystick up and down to control the machine to move left and right. The brush plate starts to rotate. After confirming that there is no fault, you can start working.

4. When working, do not rely on your own arm strength to force the machine to move forward, backward, left and right. Instead, press the handle to move the machine itself, and the human body moves naturally with the machine.