How to troubleshoot problems when using a floor scrubber

1. There are many reasons why the floor scrubber has an unsatisfactory floor scrubbing effect. For example, the floor scrubbers brush plate pressure may be insufficient, which can increase the pressure on the ground. The floor scrubbers brush plate is worn out too much and has no friction with the ground. Replace the brush plate. It should be reminded that not replacing the brush plate in time will cause wear on the ground; insufficient water volume during floor scrubber scrubbing affects the floor scrubbing effect; incorrect installation of the floor scrubbers brush plate; too many foreign objects on the brush plate affect the contact with the ground, which will seriously wear the ground.

2. The floor scrubber does not produce water. This may be a problem with the solenoid valve or the drain motor.

3. The floor scrubber has insufficient water suction. Check whether the scraper is excessively worn. You can change the scraper to the other side or replace it with a new one; whether the scraper is close to the ground, you can adjust the scraper angle to achieve the ideal effect; the sewage level in the floor scrubbers sewage tank is higher than the water suction pipe mouth, which may also affect the water suction force; check whether there are foreign objects blocking the water suction pipe; check whether the floor scrubbers sewage tank is covered. If it is not covered well, it will affect the suction force.