How to use a push-type floor scrubber

Step 1: Use the key switch of the floor washer to turn on the floor washer;

Step 2: Insert the floor brush into the brush plate, then step on the brush plate pedal to lower the floor washer's brush plate to the ground;

Step 3: Lower the water suction squeegee head to the ground;

Step 4: Adjust the amount of water to be discharged according to the degree of stains on the ground you want to clean;

Step 5: Adjust the walking speed of the floor washer. If the ground is very dirty, it is generally recommended to use a slow speed;

Step 6: Press the start button. Then you can start your cleaning work. 

When we finish the cleaning work, turn off the power of the floor washer, pull up the water suction squeegee head, step on the brush plate pedal, lift the brush plate, take out the floor brush, and finally remove the sewage in the sewage tank and clean the sewage tank to prevent bacteria from growing. After completing the above steps, pull out the key and put it in a dry place to avoid rust and unusability.